BOULON A OEIL FILETE 7/16
- GLD# 4259861796900669000
- MFG# BS14
- UPC 067965003279
Qté min. de commande 1
Description
Gray Tools boulon à œil, à épaulement non-galvanisé, système de mesure : impérial, filetage 7/16-14, 1-3/8 po queue longueur, acier au carbone forgé, sans revêtement/non enduit, 1-1/16 po de diamètre intérieur à œil, 1-13/16 po de diamètre extérieur à œil, unc-2a, longueur totale 3-9/16 po, 2000 lb de travail, longueur de filetage 1-3/8 po, 65000 lb/po-ca de traction, noter : c1030, spécification matérielle : ansi b18.15, astm a489
Spécifications
| UNSPSC | 31161610 |
|---|---|
| Diameter - Thread Size | 7/16-14 |
| Finish | Uncoated |
| Grade | C1030 |
| Inside Eye Diameter | 1-1/16 in |
| Material | Forged Carbon Steel |
| Material Specification | ANSI B18.15, ASTM A489 |
| Measurement System | Imperial |
| Outside Eye Diameter | 1-13/16 in |
| Overall Length | 3-9/16 in |
| Shank Length | 1-3/8 in |
| Tensile Strength | 65000 psi |
| Thread Length | 1-3/8 in |
| Thread Type | UNC-2A |
| Type | Self-Colored Shoulder Pattern |
| Working Load | 2000 lb |
Caractéristiques
- Never apply loads greater than rated capacity to any eyebolt
- Load should never be applied at more than a 45 deg angle from the bolt centerline
- The rated capacity is reduced to 25% when the load is applied at a 45 deg angle to the eyebolt centerline