BOULON A L'OEIL 1/2" X 1-1/2"

Maximum working loads were determined and actual lifts should be accomplished by using a very slow, steady pull

Angular lifts place additional stress on a lifting eye and should be avoided

Lifting eyes should never be ground, machined, metal stamped or altered in any way

Lifting eyes capabilities can be affected by temperature

Lifting eyes should be routinely inspected

1200 lb at 30 deg, 650 lb at 45 deg, 600 lb at 60 deg, 525 lb at 90 deg of max load

Shoulder pattern lifting eyes are recommended for use whenever possible since there is no guarantee that a load will not be subjected to an angular lift and forces