BOULON A OEIL A EMBASE 8 MM X 1,25
- GLD# 4014547394900132000
- MFG# BS8M
- UPC 067965034525
Qté min. de commande 1
Description
Gray Tools boulon à œil, à épaulement non-galvanisé, système de mesure : métrique, m8x1.25 filetage, 31.7 mm queue longueur, acier au carbone forgé, sans revêtement/non enduit, 25 mm de diamètre intérieur à œil, 43 mm de diamètre extérieur à œil, unc-2a, 82.5 mm de longueur totale, 500/1110 lb de travail, 31.Longueur de filetage 7 mm, 65000 lb/po-ca de traction, noter : c1030, spécification matérielle : ansi b18.15, astm a489
Spécifications
| UNSPSC | 31161610 |
|---|---|
| Diameter - Thread Size | M8x1.25 |
| Finish | Uncoated |
| Grade | C1030 |
| Inside Eye Diameter | 25 mm |
| Material | Forged Carbon Steel |
| Material Specification | ANSI B18.15, ASTM A489 |
| Measurement System | Metric |
| Outside Eye Diameter | 43 mm |
| Overall Length | 82.5 mm |
| Shank Length | 31.7 mm |
| Tensile Strength | 65000 psi |
| Thread Length | 31.7 mm |
| Thread Type | UNC-2A |
| Type | Self-Colored Shoulder Pattern |
| Working Load | 500/1110 lb |
Caractéristiques
- Never apply loads greater than rated capacity to any eyebolt
- Load should never be applied at more than a 45 deg angle from the bolt centerline
- The rated capacity is reduced to 25% when the load is applied at a 45 deg angle to the eyebolt centerline