BOULON A OEIL FILETE 1-1/2
- GLD# GRAY-104647
- MFG# BS48
- UPC 067965003361
Qté min. de commande 1
Description
Gray Tools boulon à œil, à épaulement non-galvanisé, système de mesure : impérial, 1-1/2-6 filetage, 3-1/2 po queue longueur, acier au carbone forgé, sans revêtement/non enduit, 2-1/2 po de diamètre intérieur à œil, 5-3/16 po de diamètre extérieur à œil, unc-2a, 9-15/32 po de longueur totale, 24000 lb de travail, longueur de filetage 3-1/2 po, 65000 lb/po-ca de traction, noter : c1030, spécification matérielle : ansi b18.15, astm a489
Spécifications
| Diameter - Thread Size | 1-1/2-6 |
|---|---|
| Finish | Uncoated |
| Grade | C1030 |
| Inside Eye Diameter | 2-1/2 in |
| Material | Forged Carbon Steel |
| Material Specification | ANSI B18.15, ASTM A489 |
| Measurement System | Imperial |
| Outside Eye Diameter | 5-3/16 in |
| Overall Length | 9-15/32 in |
| Shank Length | 3-1/2 in |
| Tensile Strength | 65000 psi |
| Thread Length | 3-1/2 in |
| Thread Type | UNC-2A |
| Type | Self-Colored Shoulder Pattern |
| Working Load | 24000 lb |
Caractéristiques
- Never apply loads greater than rated capacity to any eyebolt
- Load should never be applied at more than a 45 deg angle from the bolt centerline
- The rated capacity is reduced to 25% when the load is applied at a 45 deg angle to the eyebolt centerline