Manufacturier
Greenfield Industries
1/4 556 3/8S 4F TIN
- GLD# GREEN-117619
- MFG# C32581
- UPC 697334325819
Qté min. de commande 1
Description
Cleveland fraise en bout, coupe centre usage général à bout simple bout carré, gamme : hgc-4c, coupeur 1/4 de diamètre, 2-7/16 po longueur hors tout, 5/8 po longueur de coupe, 4 goujures, goujure hélicoïdale, 3/8 po queue diamètre, coupe à droite, angle dhélice 30 deg, droit/weldon flat queue, cobalt 8/m42 hss, étamé
Spécifications
| Application | General Finishing Applications |
|---|---|
| Cutter Diameter | 1/4 in |
| Cutting Direction | Right Hand |
| Finish | TiN Coated |
| Flute Type | Spiral |
| Helix Angle | 30 deg |
| Length of Cut | 5/8 in |
| Material | Cobalt 8/M42 HSS |
| Number of Flutes | 4 |
| Overall Length | 2-7/16 in |
| Series | HGC-4C |
| Shank Diameter | 3/8 in |
| Shank Type | Straight/Weldon Flat |
| Type | Center Cutting General Purpose Single End Square End |
Caractéristiques
- High red hardness for high heat conditions
- Multi-flute end mills deliver a smoother finish and are better for peripheral cuts
- Multi-flute end mills have a heavy duty cross section for better rigidity
- Increased number of flutes mean more cutting edges, providing more cutting action
- Coatings reduce heat and abrasion to increase tool life
- The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling even higher feed rates
- Coatings reduce the amount of torque required for machining to allow more efficient use of equipment
- TiN (titanium nitride) coating in gold color intended for aggressive machining
- TiN coating increase machining speed 25 to 30% versus bright speeds
- Applicable on titanium alloys, nickel alloys, cobalt alloys and stainless stee