PASTILLE NT3RK KCU25
- GLD# 4325362713140162000
- MFG# 4109947
Qté min. de commande 1
Description
Kennametal Embout modulaire foret, remplaçable, gamme : KSEM, code ANSI : KSEM1270HPGM KC7315, 12.7 mm diam., siège dinsertion en C, angle inclus de 140 deg, 2 arêtes de coupe, qualité du fabricant : KC7315, Arrosage traversant : Non, Carbure, revêtu PVD-TiAlN, matériaux applicables : Acier allié, fonte et acier fortement allié
Spécifications
| UNSPSC | 23241600 |
|---|---|
| ANSI Code | KSEM1270HPGM KC7315 |
| Finish | PVD-TiAlN Coated |
| Manufacturer's Grade | KC7315 |
| Material | Carbide |
| Series | KSEM™ |
| Type | Replaceable |
| Included Angle | 140 deg |
| Insert Seat Size | C |
| Diameter | 12.7 mm |
| Through Coolant (Yes/No) | Oui |
| Number of Cutting Edges | 2 |
| Manufacturers Grade | KC7315 |
| Applicable Materials | Alloy Steel, Cast Iron, High Alloy Steel |
Caractéristiques
- KSEM KC7315 HPG cutting edges enable high metal removal rates and superior tool life for steel applications
- HPG geometry works with low cutting and feed forces and provides very good centering
- Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping-resistance
- KC7315 is a fine grain carbide with a TiAlN based PVD multi-layer coating
- Its high wear-resistance enables very high cutting speeds in stable conditions
- KC7315 HPG cutting edges are perfectly suited to drill alloyed and high alloy steels
- Use KC7315 HPG cutting edges as an alternative to cast iron materials