Marque
Cleveland®
FORET LONG 3/4 9-3/4 OAL
- GLD# 4196763710390212000
- MFG# C08876
- UPC 697334088769
Qté min. de commande 1
Description
Cleveland® Taper Length Drill, General Purpose, Series: 2510, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 9-3/4 in Overall Length, 5-7/8 in Cutting Depth, Spiral Flute, 5-7/8 in Flute Length, 3/4 in Shank, Straight Shank, 118 deg Point, Radial Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Steam Oxide, Applicable Materials: Alloy Steel, Carbon Steel and Cast Iron
Spécifications
| UNSPSC | 23241606 |
|---|---|
| Cutting Depth | 5-7/8 in |
| Cutting Direction | Right Hand |
| Cutting Edge Material | HSS |
| Drill Size - Decimal Inch | 0.75 in |
| Drill Size - Fraction | 3/4 in |
| Finish | Steam Oxide |
| Flute Length | 5-7/8 in |
| Flute Type | Spiral |
| Material | HSS |
| Overall Length | 9-3/4 in |
| Point Type | Radial |
| Series | 2510 |
| Shank Size | 3/4 in |
| Shank Type | Straight |
| Type | General Purpose |
| Through Coolant (Yes/No) | Non |
| Point Angle | 118 deg |
| Applicable Materials | Alloy Steel, Carbon Steel, Cast Iron |
Caractéristiques
- High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials
- Oxide prevents chip building, galling and welding on the work piece, it is commonly used on low carbons, stainless steel and ferrous metals
- Spiral flutes are constructed with a higher flute angle to remove chips more easily