Marque
Cle-Line®
1892 9/16 S&D 1/2" SHK 3FLATS
- GLD# GREEN-114642
- MFG# C20674
Temps de livraison estimé
24 à 48h
Qté min. de commande 1
Description
Cle-Line® Silver _ Deming Drill, General Purpose, Series: 1892, 9/16 in Drill - Fraction, 0.5625 in Drill - Decimal Inch, 6 in Overall Length, 3-1/8 in Cutting Depth, Spiral Flute, 3-1/8 in Flute Length, 1/2 in Shank, Reduced/Round Shank, 118 deg Point, Radial Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Black Oxide, Applicable Materials: Low Carbons, Stainless Steel and Iron Based Ferrous Metals
Spécifications
| UNSPSC | 23241606 |
|---|---|
| Application | For general purpose drilling applications |
| Cutting Depth | 3-1/8 in |
| Cutting Direction | Right Hand |
| Cutting Edge Material | HSS |
| Drill Size - Decimal Inch | 0.5625 in |
| Drill Size - Fraction | 9/16 in |
| Finish | Black Oxide |
| Flute Length | 3-1/8 in |
| Flute Type | Spiral |
| Material | HSS |
| Overall Length | 6 in |
| Point Type | Radial |
| Series | 1892 |
| Shank Size | 1/2 in |
| Shank Type | Reduced/Round |
| Type | General Purpose |
| Through Coolant (Yes/No) | Non |
| Point Angle | 118 deg |
| Applicable Materials | Iron Based Ferrous Metals, Low Carbons, Stainless Steel |
Caractéristiques
- High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials
- Oxide coating prevents chip building, galling and welding on the work piece, it is commonly used on low carbon metals, stainless steel and ferrous metals
- Round shanks with flats are ground flat on three sides for increased chuck grip, reducing slippage and help centering the drill in the chuck