CLAMP 2-BLT 1-32/64 TO 1-44/64 IN HOS CS

Temps de livraison estimé

24 à 48h

Qté min. de commande 1

Description

Dixon® 2-Bolt Clamp, Series: Boss™, 1-32/64 to 1-44/64 in Nominal, 2-11/16 in Length, 3-1/12 in Width, 21 ft-lb, Carbon Steel Band, Domestic

Spécifications

Caractéristiques

2-bolt type clamp with 2 gripping fingers and 2 clamp sections
Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
Always tighten bolts to their specified torque value
Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
Global investment cast carbon steel
The bolts used in the boss interlocking clamps are not standard bolts
They vary from standard bolts in their length, diameter, overall thread length and material hardness
These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance
Worn-out hose couplings can be dangerous