CLAMP 2-BOLT 3/4IN 1-10/64 TO 1-20/64IN
- GLD# 9892440
- MFG# BU9
Temps de livraison estimé
24 à 48h
Qté min. de commande 1
Description
Collier à 2 boulons Dixon, jeu : boss, 3/4 po intérieur diam., 1-10/64 à 1-20/64 po extérieur diam., 2-31/32 po de longueur, 2-9/16 po largeur, boulon hexagonal 9/16 po, 21 pi lb, bande de fer, zingué
Spécifications
| UNSPSC | 31162906 |
|---|---|
| Finish | Zinc Plated |
| Inside Diameter | 3/4 in |
| Series | Boss™ |
| Width | 2-9/16 in |
| Band Material | Iron |
| Length | 2-31/32 in |
| Torque Rating | 21 ft-lb |
| Outside Diameter | 1-10/64 to 1-20/64 in |
| Bolt Size | 9/16 in Hex |
Caractéristiques
- Recommended for steam service up to 450 deg F
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
Guides & Manuels
Dixon_BU9_Full_Engineering_Drawing.pdf
TéléchargerDixon_B14_Catalog.pdf
Télécharger