Manufacturier
Dixon Valve _ Coupling
1 S BOSS CLAMP
- GLD# 9923388
- MFG# BU14
Temps de livraison estimé
24 à 48h
3 en stock
33,27 $ / chaque
Déjà client?
Accédez à vos tarifs exclusifs en vous connectant à votre compte.
Qté min. de commande 1
Spécifications
| UNSPSC | 31162906 |
|---|---|
| Domestic/Import | Domestic |
| Finish | Zinc Plated |
| Inside Diameter | 1 in |
| Series | Boss™ |
| Width | 3-1/8 in |
| Band Material | Iron |
| Length | 2-7/8 in |
| Torque Rating | 21 ft-lb |
| Outside Diameter | 1-34/64 to 1-46/64 in |
| Bolt Size | 9/16 in Hex |
Caractéristiques
- Recommended for steam service up to 450 deg F
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
Guides & Manuels
Dixon_B14_Catalog.pdf
Télécharger